Log Lift Cylinder: 2" Bore, 8" Stroke, 1.25" Rod, 3 O'Clock Ports

In stock
SKU
34-153-CYLN-03
$100.99

This RuggedMade double-acting welded hydraulic cylinder is ideal for the log lift on your log splitter. It has a 2" bore, an 8" stroke, and a 1.25" diameter rod. Cross tube mounts at both ends support a wide variety of applications.

Features include:

  • 3/8" NPT work ports (restricted)
  • 3 o'clock port orientation
  • 3,000 PSI maximum working pressure
  • Durable and fade-resistance black gloss paint
  • Fits RuggedMade log splitter models RS-737 and RS-322
  • Features welded construction for strength and durability

Rugged Cylinders Made for Log Splitters

This cylinder is suitable for a wide range of applications, including log splitter log lifts. The end cap is threaded for easy servicing. Cross tube mounts make installation a breeze. Tubes accept 1" OD mounting pins (sold separately.)

The work ports are 3/8" female NPT.

Note that both ports are restricted to reduce the speed at which the log lift raises and lowers. This 2" x 8" cylinder is also available with unrestricted work ports.

Technical Details

  • SKU: 34-153-CYLN-03
  • Manufacturer: RuggedMade
  • Part Number: W2.13.07-00
  • Cylinder Type: Welded
  • Action:

    A double-acting cylinder uses hydraulic pressure to both extend and retract the rod. A single-acting cylinder uses hydraulic pressure to extend the rod and relies on some other force to retract the rod.

    Double-Acting
  • Bore (ID): 2"
  • Stroke:

    The distance the cylinder rod end travels from fully retracted to fully extended.

    8"
  • Rod (OD): 1.25"
  • Mounting Type:

    The type of connection used to secure the base of the cylinder to the mounting platform.

    Cross Tube
  • Mounting Pin (OD): 1"
  • Rod End Type: Cross Tube
  • Rod End Pin (OD): 1"
  • Work Ports: 3/8" NPT(F)
  • Max Working Pressure: 3,000 PSI
  • Retracted Length:

    The length between the center of the rod end hole and the center of the base end hole when the rod is fully retracted.

    16" (pin to pin, center on center)
  • Extended Length:

    The length between the center of the rod end hole and the center of the base end hole when the rod is fully extended.

    24" (pin to pin, center on center)
  • Cylinder Length:

    The overall length of the cylinder when the rod is fully retracted, as measured from the outside edge of the rod end to the outside edge of the base end.

    18" (retracted, edge to edge)
  • Product Weight: 15.00 lbs

Thanks for your feedback!

Your comments have been submitted.

Log Lift Cylinder: 2" Bore, 8" Stroke, 1.25" Rod, 3 O'Clock Ports

We Value Your Feedback

Is there a specification that is missing or incorrect? Let us know by filling out the form below.

Reviews & Questions

SIMILAR PRODUCTS