Pump Mount Bracket: Round, 4 Holes, 2.8" Bolt Circle
Use this bracket to mount a hydraulic pump to a log splitter.
- Fits 11, 13, and 16 GPM hydraulic pumps
- Fits many 240cc (8hp) to 420cc (15hp) engines
- Includes removable safety cover
Keep Your Hydraulic Pump Securely Connected
Keep engine and pump shafts properly aligned with this hydraulic pump mounting bracket from RuggedMade.The bracket includes a removable safety cover to keep debris and fingers away from the spinning coupling.
The pump side of the bracket features four holes to match the four-bolt mounting flange common on many 11, 13, and 16 GPM hydraulic pumps. The bolt mounting holes are threaded. Use M8-1.25 x 20mm bolts.
This bracket fits many horizontal and vertical-shaft engines in the 240cc (8hp) to 420cc (15hp) range. The mounting pattern and dimensions are based on typical Honda GX-series engines. This pattern can also be found on most similar such as the Predator series from Harbor Freight, Loncin, Raven, and Lifan. It may also fit various engines from Kohler and Briggs & Stratton.
This bracket is not guaranteed to fit all engines. Please check the dimensions of the mounting holes on your engine and confirm that this bracket is compatible prior to purchasing.
- SKU: 72-145-PMOUNT-11-16
- Manufacturer: RuggedMade
- Bracket Length: 5.69"
- Pump Side Center Hole: 1.75" ID
- Engine Side Center Hole: 2.37" ID
- Pump Side Bolt Circle: 2.8" diagonal hole to hole
- Engine Side Bolt Circle: 5" diagonal hole to hole
- Pump Side Bolt Holes: M8-1.25 x 20mm threaded
- Engine Side Bolt Holes: 11/32" threaded
Thanks for your feedback!
Your comments have been submitted.
We Value Your Feedback
Is there a specification that is missing or incorrect? Let us know by filling out the form below.
Reviews & Questions
Pump Mount Bracket: Square, 4 Holes, 2.8" Bolt Circle$46.95SKU: 72-145-PMOUNT-11-16-SM
Pump Mount Bracket: Round, 2 Holes, 4.25" Bolt Circle$67.95SKU: 72-145-PMOUNT-22-28