Snowplow Hydraulic Power Unit: 12V Motor
This snow plow hydraulic power unit is designed to control the position of a snowplow blade.
- Heavy-duty 2 HP motor
- 12 volt DC motor solenoid
- Low amp draw for longer battery life
- 2,900 PSI pump
- 1.5 GPM flow rate
- 1/4" NPT ports
Remote controller not included.
Stay in Control of Your Snowplow Blade
This power unit is a self-contained YBZ power unit designed to control the blade angle on snowplow equipment. This unit consists of a pressure-balanced gear pump, 12-volt DC motor, multi-functional manifold, valves, and tank.
The sealed motor provides reliable performance in cold weather conditions. An adjustable needle valve on the solenoid allows you to control the lowering speed.
When the plow strikes an object, the cross-over relief valves allow fluid to flow, reducing wear and tear on both the plow and truck.
The horizontal mount unit provides power lift, hold, and gravity down for a single-acting cylinder. It also provides left and right control for two single-acting cylinders or one double-acting cylinder for blade angle.
The unit features a 0.53-gallon steel reservoir with a built-in breather, check valves for load holding, adjustable cross-over relief valves, and a 2-bolt mounting base.
Technical Details
- SKU: 32-129-PUMP-YBZ5-F2-09
- Displacement: 2.1cc
- Flow Rate: 1.5 GPM
- Power Output: 2.0hp
- Manufacturer: RuggedMade
- Max Pressure: 2,900 PSI
- Max RPM: 3,000
- Outlet Port: 1/4" NPT
- Part Number: YBZ5-F2.1Z1W14/WUAAT1
- Product Weight: 40 lbs
- Reservoir Capacity (Gal): 0.53 gal
- Voltage: 12v
Thanks for your feedback!
Your comments have been submitted.
We Value Your Feedback
Is there a specification that is missing or incorrect? Let us know by filling out the form below.
Reviews & Questions